Shoprider HD 888WHD User Manual download pdf (Page 10)

4/27/2006

Getting to Know Your Shoprider Powerchair

The Joystick Controller (VSI)

Shoprider WS (888WS)

1. On-Off Button: This button turns the joystick

controller (hereinafter referred to as VSI) on

and off. Do not use this button to stop the

power chair, except in an emergency.

2. Battery Gauge: This is a 10-segment

display, which indicates if the VSI is switched

on and gives the state of charge of the

battery. Additionally, any faults in the

Powerchair electrical system are also

indicated by this display. Refer to Table 1 for

more details.

3. Maximum Speed Indicator: This is a 5-

segment display, which indicates the

maximum speed setting selected.

4. Horn Button: This button operates the

Powerchair’s horn.

5. Speed Decrease Button: This button

decreases the maximum speed.

6. Speed Increase Button: This Button

Increases the maximum speed.

7. Joystick: This controls the speed and direction of the Powerchair.

Push the joystick in the direction you want to go. The further you

push it, the faster the speed will be. Releasing the joystick will

automatically engage the brakes and stop the Powerchair.

8. Charging Port: This is the only charging port for the Shoprider WS.

When using this charging port only plug into this port with the

qualified Shoprider charger certified by the original manufacturer of

the Powerchair. This port should not be used as a power supply for

any other electrical devices. Doing either of these as stated above

will void the warranty of the Powerchair.

Note: The controller can be fitted to suit either right or left-handed

users. Please contact your provider for further assistance.

Figure 3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

Shoprider HD 888WHD User Manual Page 10